Who Are MultiOne?
MultiOne is an Italian brand, designed and manufactured in Vicenza.
Every loader runs on one articulated chassis fitted with MultiOne’s own quick-hitch system, so operators swap tools on site in minutes without any hand tools, and without swapping to a different machine for each job.
The chassis pivots at the centre pin, letting a MultiOne loader turn inside its own footprint. A skid steer, steering through the wheels alone, scrubs across the ground doing the same turn.
Every series shares the same core design: an articulated, telescopic frame, a quick-hitch attachment system, and enough auxiliary hydraulic flow to run powered tools alongside static buckets and forks.
Size, engine power, and lift capacity change between series. But the underlying machine stays the same throughout.
The MultiOne Series Range
The MultiOne mini loader range covers eight series, each built around the same articulated, telescopic design.
Where you land depends on the attachments you’ll run and how much lifting height and reach the job needs.
ILH Groundcare takes the time to understand your job requirements to accurately recommend the right series and the attachments for the task at hand.
1 and 2 Series: Compact and Manoeuvrable
The MultiOne 1 Series and 2 Series are the smallest machines in the range, built for tight sites and lighter loads.
They are built to fit through a standard garden gate and handle buckets, forks, and light augers comfortably.
Turning circle matters more than raw power at this end of the range, since manoeuvring around obstacles makes up most of their working life, with heavy material handling a smaller part of the job.
5, 6 and 7 Series: The Mid-Range Workhorses
The 5, 6 and 7 Series carry more lifting capacity and greater telescopic reach than the entry models, with enough engine power to run flail mowers, trenchers, and stump grinders across a full working day.
The 7 Series, the largest in this bracket, runs a 25hp diesel engine with enough torque to keep heavier attachments working without labouring under continuous use, and a tipping load of 1,725kg.
Landscapers, tree surgeons, and groundcare contractors running five or six days a week of commercial work typically need this bracket, because the power and reach are built for daily use.
8 and 11 Series: Heavy-Duty Capacity
The 8 and 11 Series are the largest compact loaders we stock, built for continuous heavy lifting, high power output, and powered attachments that run all day.
The 11 Series tops out at 75hp, while still fitting on a standard 3.5t plant trailer behind a lorry.
Durability under sustained load matters more than purchase price at this end of the range, since these machines are built to run powered attachments continuously through a working day.
EZ Series: Zero-Emission Electric
The EZ Series is MultiOne’s fully electric loader, built for indoor work, noise-sensitive sites, and operators cutting their emissions without giving up lifting performance.
It runs the same quick-hitch attachments as the diesel range.
Running a diesel engine indoors usually isn’t an option.
The EZ Series covers exactly those sites: warehouses, livestock buildings, and enclosed yards where exhaust and noise rule out a diesel machine.
Engineering That Sets MultiOne Apart
The spec sheet numbers matter less than how MultiOne builds the machine underneath them.
Four features do most of the work: the steering geometry, the boom, the drivetrain, and the controls.
Articulated Steering and a Zero Inside Turning Circle
MultiOne’s articulated chassis pivots at the centre pin, so the rear wheels track the exact path the front wheels take.
This centre-pivot design gives a zero inside turning circle, useful on sites where a skid steer would chew up the ground turning on the spot.
Four-wheel drive and traction across all four wheels keep the machine planted on slopes and soft ground where a two-wheel-drive loader would lose grip.
Telescopic Boom and Lift
As a telescopic loader, reach matters as much as raw lift. The boom extends without the machine needing to reposition constantly, which speeds up repetitive tasks like loading a lorry or stacking pallets.
Lift height, capacity, and machine weight all increase together through the range.
Hydrostatic Drive and the Torque Divider
Hydrostatic drive gives stepless speed control with no fixed gears to shift through, so drive speed matches the job precisely.
A torque divider splits power between the wheels automatically, sending more torque to whichever wheel has grip when the others start to slip.
Multi-Function Joystick Control
A multi-function joystick runs the boom and the attachment’s auxiliary function together, so swapping from a bucket to a powered attachment doesn’t mean learning a new control layout.
The attachments control interface stays consistent across the whole range.
Over 170 Attachments, One Machine
MultiOne’s own catalogue lists more than 170 attachments across the range, covering everything from basic buckets to powered tools that run off the loader’s own hydraulics.
Buckets, pallet forks, and grab arms cover general material handling. Augers drill post holes, sweepers clear yards and car parks, and flail or rotary mowers handle grounds maintenance. Trenchers cut cable and drainage runs, and a concrete mixer attachment turns the loader into mobile mixing capacity on site.
The wider range of MultiOne attachments is available to order through us as specific jobs call for something less common.
We’ll talk through your typical workload and recommend what’s actually worth owning for it.
Where MultiOne Loaders Earn Their Keep
A compact tractor pulls harder than a MultiOne loader, but it can’t swap to a bucket, a sweeper, and a mower in one afternoon.
That range is why MultiOne turns up right across the groundcare industry, agriculture, and construction.
Landscaping and groundcare crews are where we sell most MultiOne loaders.
One machine handles material handling, mowing, and ground preparation across a working day, then swaps to a sweeper or trencher without a second machine turning up on site.
On residential gardens, the tight turning circle gets a loader through gates a mini digger can’t fit through. Larger commercial contracts see the same machine cover jobs that would otherwise need two or three separate machines.
Beyond groundcare, agricultural, utilities, and construction contractors run the same equipment for farm yard work, site clearance, and material movement wherever a telehandler won’t fit or causes ground damage.
Every series fits a standard plant trailer.
ILH Groundcare, Your Trusted MultiOne Dealer in Scotland
We’re a specialist MultiOne dealer, part of a family-run business operating since 2007.
Every new loader we sell comes with a 3-year warranty and full backup from our Cumbernauld workshop for as long as you own it.
The 3-year warranty on every new MultiOne we sell reflects how the machine actually holds up after months of daily use.
Our technicians work on MultiOne loaders every week, so servicing, hydraulic repairs, and warranty claims go through people who know the machinery, not a generalist plant workshop learning as they go.
We deliver new and used MultiOne loaders UK-wide from our Cumbernauld base, with demos available on your own site so you can see a machine handle your actual ground and materials before you commit.
